ABIG PRESS FOR PRINTING WITH REDUCER AND MOVABLE TABLE 60×90

Press for printing with a reducer and movable table measuring 60x90 cm.

*Pre-order, delivery within 3 weeks

Large printing machines with drive on the printing table have a printing plate driven by a rack and pinion. It can move simply by turning the drive wheel. In this case, the upper roller does not apply pressure. This is particularly advantageous for soft printing materials, such as printing plates made of corrugated cardboard and styrene plates. Otherwise, of course, all other printing techniques can be used, such as etching, linocut, woodcut, and intaglio printing. The frame of the press is made of sturdy cast aluminum, and the upper and lower rollers are made of steel with a diameter of 80 mm. The height of the upper roller can be adjusted using two adjusting screws. The rotating handles are designed to easily achieve sufficient pressure for creating etchings. To reduce the counterforce, the drive shaft has a reduction of 2.4:1 and acts directly on the drive gears of the lower shaft and the racks of the printing plate through an innovative reduction system with double gears. The printing plate consists of a galvanized steel plate with a thickness of 2.5 mm with bolted racks and a plywood plate with a thickness of 15 mm. The printing plate is guided by four ball bearings. A suitable printing felt is included. The printing force is approximately 1000 kg.

For printing with common sizes up to 60 cm
Diameter of the lower and upper cylinder 80 mm
Printing width up to 600 mm, table length 900 mm
Movement with cross handle, gear ratio 2.4:1
Pressing machine up to 1000 kg
Total weight of the printing machine 44.3 kg
Felt included